3. Telephone43phone number with another pattern (page 41,42).L When this feature is set to OFF the unit willstill be able to display Caller ID, but incomingCaller ID numbers will not be automaticallyedited.L If you move to another area, you may need toturn this feature OFF to erase the previouslyedited area codes. To use this feature again,turn it ON and reprogram the area codes youwant to be edited once again.3.11 Erasing callerinformationL Keep the front cover page open for buttonlocations.3.11.1 Erasing all callerinformationWith the handsetMake sure the handset is not being used.1 Press {Rcvd calls} (soft key), {v} or {e} todisplay a caller information.2 Press {All erase} (soft key).L To cancel erasing, press {No} (soft key).3 Press {Yes} (soft key).With the base unit1 Press {MENU} repeatedly to display“CALLER SETUP”.2 Press {SET}.L “CALL LIST ERASE” will be displayed.3 Press {SET}.L To cancel erasing, press {STOP}, then{MENU}.4 Press {SET}.5 Press {STOP}.3.11.2 Erasing specific callerinformationWith the handsetMake sure the handset is not being used.1 Press {Rcvd calls} (soft key), {v} or {e} todisplay a caller information.2 Press {v} or {e} repeatedly to display thedesired item.3 Press {Erase} (soft key).L To erase other items, repeat from step 2.4 Press {OFF}.With the base unit1 Press {CALLER ID}.2 Press {A} or {B} repeatedly to display thedesired item.3 Press {ERASE}.L To erase other items, repeat from step 2.4 Press {STOP}.
