8. Programmable Features74Features (Handset)8.5 Handset programming Important informationL Make sure the handset and base unit arenot being used.1 Press {MENU}.2 Press the code number ({0} to {9} and {#}).3 Press the desired direct command to displaythe desired setting.L This step may be slightly differentdepending on the feature.4 Press {Save} (soft key 1).5 Press {OFF}.Note:L To exit programming, press {OFF} at anytime.8.6 Direct command chart for handsetFor more details on the features, see page 76 to page 77.{OFF}{MENU}1Feature Feature code Direct command PageRinger volume {1}{1} {1}: Low {2}: Medium{3}: High (default) {0}: Offpage 27Ringer tone {1}{2} {1}: “Tone 1” (default){2}: “Tone 2” {3}: “Tone 3”{4}: “Melody 1” {5}: “Melody 2”{6}: “Melody 3” {7}: “Melody 4”page 76Message play {2} ---------- page 61Voice enhancer {5} {1}: “On” {0}: “Off” (default) page 32LCD contrast {0}{1} {1}-{6}: Level 1-6 page 76Key tone {0}{2} {1}: “On” (default) {0}: “Off” page 76Auto talk {0}{3} {1}: “On” {0}: “Off” (default) page 76Caller ID number auto edit {0}{4} {1}: “On” (default) {0}: “Off” page 42Set dial mode {0}{5}{1} {1}: “Pulse” {2}: “Tone” (default) page 76Set flash time {0}{5}{2} {1}: “700ms” (default){2}: “600ms” {3}: “400ms”{4}: “300ms”{5}: “250ms” {6}: “110ms”{7}: “100ms” {8}: “90ms”page 76Set line mode {0}{5}{3} {1}: “A” {2}: “B” (default) page 76
