Panasonic KX-HTS824 Feature Manual

Also see for KX-HTS32: Manual Getting started Programming Item List Getting started

Contents

Panasonic KX-HTS824 Feature Manual Manual pdf 51 page image

Operation[Disconnecting the current call]The current call is disconnected by going on-hook during a conversation and if a call rings, go off-hook.[Placing the current call on hold]For All Extensions:Execute the call holding operation (Refer to 3.7.1 Call Hold). Then go on-hook, and go off-hook again.For KX-HDV series SIP phones:Press the DN key on an extension which displays incoming calls during a conversation. (Refer to 4.4 DNKey)ConditionsConditions NoteIt is possible to select whether to enable the Call Waiting feature foreach extension through Web Maintenance Console.The number of simultaneous operation depends on the pre-programmed setting (Call Limit).Example:If Call Limit is set to 8 (default), Up to 7 operations can performsimultaneously.A user cannot perform the [Placing the current call on hold]operation, during the following calls:• DISA (Refer to 3.1.4 DISA (Direct Inward System Access))• Meet Me (Refer to 3.9.2 Meet-me conference)• Doorphone (Refer to 3.11.1 Doorphone Call)• Built-in VM (Refer to 5 Voice Mail Features)• Paging (Refer to 3.10 Paging Features)PIL Reference2.3.1 PBX Configuration—[2-1] Extension—Port—SIP Extension2.3.2 PBX Configuration—[2-2] Extension—Phone3.7 Holding Features3.7.1 Call HoldDescriptionAn extension user can put a call on hold. Any extension user can retrieve a held call.Operation[Call Hold]To hold a call, press the [HOLD] button during a conversation.[Call Hold Retrieve]Operation for retrieving a held call depends on the type of telephone being used. For details, refer to manualfor your telephone.3.7 Holding FeaturesFeature Manual 51