PIL Reference2.2.2 PBX Configuration—[1-2] System—MOH3.8 Transferring Features3.8.1 Call Transfer-ScreenedDescriptionIt is possible to transfer a trunk or an extension which is in a conversation to another extension afterconfirming by speaking with the other party at the transfer destination.Call Transfer—Screened is also known as Call Transfer with Announcement.OperationPerform Call Transfer-Screened using the following procedure:1. Put the current call on Consultation Hold by executing the following operations:SLT: HookingSIP: Press the [TRANSFER] button2. After a dial tone is heard, make a call to the transfer destination. It is possible to call from an extensionusing the DSS button while a dial tone is being heard for entering the transfer destination.3. After the transfer destination answers, go on-hook.Perform Cancel Call Transfer-Screened using the following procedure:SLT: Operation is as follows:• Hooking. After that, the original two-party conversation will be restart.• Go on-hook. After that, the operated extension will ring.SIP extension: Press the [CANCEL] button twice.ConditionsConditions NoteThe following cannot be set as transfer destinations:• DISA (Refer to 3.1.4 DISA (Direct Inward System Access))• Meet Me (Refer to 3.9.2 Meet-me conference)• Doorphone (Refer to 3.11.1 Doorphone Call)• Built-in VM (Refer to 5 Voice Mail Features)• Paging (Refer to 3.10 Paging Features)Analog extension, SIP phone can operate the Call Transfer feature.General SIP extension depends on the terminal specifications.The FWD setting for the transfer destination extension is enabled. Ifthe FWD destination of the Transfer destination is DISA or Meet-me,call transferring will be restricted.Reference:3.1.4 DISA (Direct Inward SystemAccess)3.9.2 Meet-me conferenceA party who is put on Consultation Hold will hear Music on hold(MOH).Refer to 3.7.3 Music on Hold.3.8 Transferring Features54 Feature Manual