Panasonic KX-HTS824 Feature Manual

Also see for KX-HTS32: Manual Getting started Programming Item List Getting started

Contents

Panasonic KX-HTS824 Feature Manual Manual pdf 56 page image

Conditions NoteWhen the transfer destination is an extension:If the transfer destination does not answer within the pre-programmed time period (FWD No Answer Time), either FWD NAor Transfer Recall will operate.When the transfer destination is a trunk:If the transfer destination does not answer within 180 seconds,Transfer Recall will operate.Refer to 3.1.9 Call Forwarding(FWD)It is possible to select the operation when the call is transferred toextension or extension group as follows:• FWD PriorityFWD NA will operate when FWD NA is set. Otherwise TransferRecall will operate.• Transfer RecallTransfer Recall will always operate.Programming Item List:• 2.3.2 PBX Configuration—[2-2]Extension—Phone—FWD/DND—Transferred callno answer option• 2.3.4 PBX Configuration—[2-4]Extension—Extension Group—Group Setting—Transferredcall no answer optionTransfer Recall operation is different depending on the status of theforwarding extension:• IdleTransfer Recall will operate.• During a conversation or receiving a callIf Call Waiting is enabled, Transfer Recall will operate. Otherwise,Transfer Recall will operate as soon as the forwarding extensiongoes becomes idle.If there is no answer to thesecond call from the transferdestination after calling for apreprogrammed time period(Disconnect after Recall(x60s)), it will be disconnected.PIL Reference2.2.5 PBX Configuration—[1-5] System—Timers2.3.1 PBX Configuration—[2-1] Extension—Port3.8.3 Call Transfer-BlindDescriptionThe Function to Transfer an external line or an extension in communication to another extension withoutconfirming the ring back tone of the outgoing call to the Transfer destination.This feature is only available for SIP extensions. (For general SIP phones, the operation differs dependingon the phone.)OperationPerform Call Transfer-Blind using the following procedure: (For KX-HDV series only)1. Press the [Blind] Key2. Dial the transfer destination number and go on-hook.[Transfer Recall]• If a transfer destination does not answer within a certain length of time, the call will ring at the extensionof the person who made the transfer operation. For more information, refer to 3.8.2 Call Transfer-Unscreened.3.8.3 Call Transfer-Blind56 Feature Manual