Panasonic KX-HTS824 Feature Manual

Also see for KX-HTS32: Manual Getting started Programming Item List Getting started

Contents

Panasonic KX-HTS824 Feature Manual Manual pdf 55 page image

PIL Reference2.3.1 PBX Configuration—[2-1] Extension—Port3.8.2 Call Transfer-UnscreenedDescriptionThis feature transfers a trunk or an extension in a conversation to another extension without speaking to theother party at the transfer destination, with the caller being transferred hearing a ring back tone while thetransfer destination is being called.Call Transfer—Unscreened is also known as Call Transfer without Announcement.OperationPerform Call Transfer-Unscreened using the following procedure:1. Put the current call on Consultation Hold by executing the following operations:SLT: HookingSIP: Press the [TRANSFER] button2. After a dial tone is heard, make a call to the transfer destination.3. Before the transfer destination answers, go on-hook.Perform Cancel Call Transfer-Unscreened using the following procedure:SLT: Hooking.SIP extension: Press the [CANCEL] button twice.[Transfer Recall]• If a transfer destination does not answer within a certain length of time, the call will ring at the extensionof the person who made the transfer operation.ConditionsConditions NoteThe following cannot be set as transfer destinations:• DISA (Refer to 3.1.4 DISA (Direct Inward System Access))• Meet Me (Refer to 3.9.2 Meet-me conference)• Doorphone (Refer to 3.11.1 Doorphone Call)• Built-in VM (Refer to 5 Voice Mail Features)• Paging (Refer to 3.10 Paging Features)The FWD setting for the transfer destination extension is enabled. Ifthe FWD destination of the Transfer destination is DISA or Meet-me,call transferring will be restricted.Reference:3.1.4 DISA (Direct Inward SystemAccess)3.9.2 Meet-me conferenceA party who is put on Consultation Hold will hear Music on hold(MOH).Refer to 3.7.3 Music on Hold.3.8.2 Call Transfer-UnscreenedFeature Manual 55