7.4.5 Utility—Monitor/Trace—CS Status Monitor—LAN SyncGroupThis utility monitors the status of CSs being synchronized with LAN synchronization (KX-NS0154 only). CSsreceive data from other CSs that they are currently synchronized with. Information is displayed for IP-CSs thatare in INS status.This option is only available at Installer level in On-line mode.The displayed items for each CS are as follows:Item DescriptionIndex A unique index for the CS. (This depends on the number of V-IPCS4 cardsand the number of connected CSs.)Site The site to which the CS is connected.Shelf Always displays “Virtual”.Slot The slot number of the CS in the selected synchronization group.Port The port number of the CS.Connection The connection status of the CS (OUS/INS/Fault).LAN Sync Status The current synchronization status of the CS, as follows:1. No Sync.: Attempting to establish synchronization2. Establishing Sync.: Establishing synchronization3. Good: Currently synchronized4. Keep Sync: Maintaining synchronization5. Unstable: The CS is running unsynchronized6. Sync Lost: Synchronization has been lost7. Out of system: Cannot communicate with the PBX8. Sync. Master: CS is the sync master or is a slave acting as the syncmasterLAN Sync Quality Level Shows the quality of the synchronization, depending on the value of LANSync Status, as follows:• 1, 7, 8: "–" is displayed.• 6: The quality of the synchronization before synchronization was lost isdisplayed.• Other: A number indicating the quality of the synchronization (-16384–16384).To monitor the status of CSs1. From the LAN Synchronization Group Number drop-down list, select the desired LAN SynchronizationGroup number.2. From the Interval Timer drop-down list, select the number of seconds between each automatic screenrefresh.3. Click Start to monitor the status of LAN synchronization.Monitoring will be performed and the screen will refresh according to the specified interval.4. Click Stop to end monitoring.5. To refresh the screen manually at any time, click Refresh.6. To collect the monitored data, click Start Capture.134 PC Programming Manual Document Version 2016-037.4.5 Utility—Monitor/Trace—CS Status Monitor—LAN Sync Group
