9.33 PBX Configuration—[1-5] Configuration—DSPResourceIP communications that are handled by the PBX require DSP resources. DSP resources can be reserved forvarious functions of the PBX.The DSP resource advisor is a tool that analyzes the configuration and user requirements for the system inorder to recommend which DSP card(s) should be used. Click DSP Resource Advisor to access this feature.(See 9.33.1.1 PBX Configuration—[1-5-1] Configuration—DSP Resource—Setting—DSP ResourceAdvisor.)9.33.1 PBX Configuration—[1-5-1] Configuration—DSPResource—SettingSet the amount of DSP resources to reserve for each PBX function that uses DSP resources.Option DSP PowerIndicates the total amount of available DSP resources based on the installed DSP card(s) (reference only).The number of resources provided by each type of DSP card is as follows:• DSP S card: 63• DSP M card: 127• DSP L card: 254Up to 2 DSP cards can be installed on the mother board.Because the system reserves 2 resources for internal system functions, the total amount of available resourcesindicated will be 2 less than the total resources of the installed card(s).DefaultNot applicableValue RangeResource amount (3 digits)Maintenance Console Location9.33 PBX Configuration—[1-5] Configuration—DSP ResourceFeature Manual References5.1.18 DSP Resource UsageOption DSP #1, Option DSP #2Indicates the type of the installed DSP card(s) (reference only).DefaultNot applicableValue RangeDSP S, DSP M, DSP LDocument Version 2016-03 PC Programming Manual 4779.33.1 PBX Configuration—[1-5-1] Configuration—DSP Resource—Setting
