9.23 PBX Configuration—[1-1]Configuration—Slot—SLC2 - Port PropertyVarious settings can be programmed for each extension port.To view the total number of each type of extension connected, click Port Type View.The Shelf, Slot, and Port for each item are displayed for your reference. For details, see CommonProgramming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.NoteOther programming items that are displayed on this screen but not listed below are used only whenprogramming extensions connected to a legacy gateway (KX-TDE/KX-NCP/KX-TDA PBX). For additionalinformation about programming items not described here, refer to the PC Programming Manual of thelegacy gateway PBX.For information about legacy gateways, see 9.28 PBX Configuration—[1-1]Configuration—Slot—Legacy-GW1/Legacy-GW2.Port TypeIndicates the port type (reference only).DefaultSLTValue RangeSLT: SLT port (SLC)Maintenance Console Location9.23 PBX Configuration—[1-1] Configuration—Slot—SLC2 - Port PropertyTelephone TypeIndicates the connected telephone type (reference only).DefaultSLTValue RangeSLT: SLT is connected (or no telephone is connected to the SLT port).Maintenance Console Location9.23 PBX Configuration—[1-1] Configuration—Slot—SLC2 - Port PropertyConnectionIndicates the port status. To change the status of the port, click the desired cell in the column, and then selectINS or OUS for the port.This option is only available in On-line mode.Document Version 2016-03 PC Programming Manual 4279.23 PBX Configuration—[1-1] Configuration—Slot—SLC2 - Port Property
