Panasonic KX-TCD340FX Operating Instructions Manual

Also see for KX-TCD340FX: Quick guide

Contents

Panasonic KX-TCD340FX Operating Instructions Manual Manual pdf 36 page image

Base Unit Settings36Call optionsChanging the recall timeChange the recall time, if necessary,depending on the requirements of yourservice provider or PBX.1 Press $ (middle soft key).2 Select Z, then press ,.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page37).4 Select “Call Options”, then press,.5 Select “Recall”, then press ,.6 Select the desired setting, then press,.7 Press {ih}.Setting pause lengthChange the pause length, if necessary,depending on the requirements of yourservice provider or PBX.1 Press $ (middle soft key).2 Select Z, then press ,.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page37).4 Select “Call Options”, then press,.5 Select “Pause Length”, then press,.6 Select the desired setting, then press,.7 Press {ih}.Storing/changing emergencynumbersThese settings determine which phonenumbers can be dialled while the call barfeature is on (page 31).1 Press $ (middle soft key).2 Select Z, then press ,.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page37).4 Select “Call Options”, then press,.5 Select “Emergency No.”, then press,.6 Select a memory location, then press,.L If the memory location alreadycontains an emergency number, thenumber is displayed.7 Enter/edit the number, then press ,.L To erase an emergency number, pressand hold {C/T}.8 Press {ih}.Setting call restrictionYou can restrict the base unit or selectedhandsets from dialling certain numbers. Upto 6 phone numbers can be stored. Storingarea codes here will prevent the restrictedextensions (the base unit or selectedhandsets) from dialling any phone number inthat area code.Important:L Call restriction can be set using handset 1only. (To confirm which handset is handset1, press {x} and {1} on the base unit.Handset 1 will ring.)1 Press $ (middle soft key).2 Select Z, then press ,.3 Enter “0000” (default base unit PIN).TCD340FX(e).book Page 36 Wednesday, June 8, 2005 3:57 PM