SMS (Short Message Service)42Using SMS (ShortMessage Service)SMS allows you to send and receive textmessages between other fixed-line andmobile phones that support compatible SMSnetworks and features.Important:L To use SMS features, you must:– subscribe to the Caller ID and/orappropriate service– confirm SMS is turned on– confirm the correct message centrenumbers are storedConsult your service provider for detailsand availability.Note:L A total of 47 messages (at 160characters/message) can be saved. Totalnumber may be more than 47 if length ofmessages are less than 160characters/message.L If the unit is connected to a PBX system,you may not be able to use SMS features.Turning SMS on/offThe default setting is “Off”.1 Press $ (middle soft key).2 Select X, then press ,.3 Select “Settings”, then press ,.4 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page37).5 Select “SMS On/Off”, then press,.6 Select “On” or “Off”, then press ,.7 Press {ih}.Note:L If you try to send a message while SMS isturned off, a tone sounds and themessage is placed in the receive list with“FD” attached to it.L If someone tries to send you a messagewhile SMS is turned off, the message willnot be received and the message centrenumber will be logged in the caller list.Storing SMS messagecentre numbersSMS message centre telephone numbersmust be stored in order to send and receiveSMS messages.L Consult your service provider for moreinformation.1 Press $ (middle soft key).2 Select X, then press ,.3 Select “Settings”, then press ,.4 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page37).5 Select “Message Centre1” or“Message Centre2”, then press,.6 Edit the number as necessary, thenpress ,.7 Select “Save”, then press ,.8 Press {ih}.Note:L If your phone is connected to a PBX, youneed to add the PBX line access numberand a dialling pause to the beginning ofthe Message Centre 1 phone number.TCD340FX(e).book Page 42 Wednesday, June 8, 2005 3:57 PM