E 3 FeaturesConditions • Programming the DSS and PF buttons can be done only from thepaired telephone using Station Programming or Programming withPersonal Computer. System Programming with Proprietary Telephoneis not available.• If the extension number assigned to a DSS button is changed to anothernumber, the DSS button automatically follows the new number. (Re-programming is not necessary.)• During System Connection* DSS Consoles must be paired withtelephones in the same system.Connection References Section 2, Installation,2.3.3 Extension ConnectionProgramming ReferencesSection 4, System Programming,[007] DSS Console Port and Paired Telephone AssignmentStation Programming ......................................................User Manual,Flexible Button AssignmentFeature References Section 3, Features,Button, Flexible One-Touch Transfer by DSSButtonOperation References DSS Console Features—User ManualElectronic Station LockoutDescription Allows the extension users to lock their stations so that other userscannot make outgoing CO calls. Any 3-digit numeric code can beused to lock the station. The same code is used to unlock it.Conditions • Making intercom calls and receiving intercom or CO calls arepermitted on the locked station.• Remote Station Lock Control overrides Electronic Station Lockout. IfOperator 1 sets Remote Station Lock on a station that has already beenlocked by the station user, the user cannot unlock it.• It is programmable to admit the press of the FLASH button during aCO call on the locked station.Programming ReferencesSection 4, System Programming,[100] Flexible Numbering, Electronic station lockout set / cancel3-60 Features *: Available for KX-TD1232 only.
