4.5 TRS / ARS ProgrammingARS Time313System Programming 4-71Description Assigns times for the four ARS time schedules. It is possible tosplit a day into four time zones (maximum) so that the leastexpensive line is selected for that time. According to the servicehours and charges offered by your carriers, enter the starting time ofeach zone.Selection • Time schedule: Time-A / Time-B / Time-C / Time-D• Time (hour) : 1 through 12 / Disable (no schedule)• AM / PMDefault Time-A – 8:00 AM; Time-B – 5:00 PM; Time-C – 9:00 PM;Time-D – DisableProgramming 1. Enter 313.Display: ARS Time2. Press NEXT to program Time-A.Display example: Time-A: 8:00 AMTo program another time schedule, keep pressing NEXT or PREVuntil the desired time schedule is displayed.3. Enter the hour.To set no schedule (Disable), press SELECT, and go to step 6.If “Disable” is selected, pressing SELECT shows the previous storedhour.To change the current entry, press CLEAR and the new hour.4. Press → to select AM / PM.5. Press SELECT for AM or PM.6. Press STORE.7. To program another time schedule, keep pressing NEXT orPREV until the desired time schedule is displayed.8. Repeat steps 3 through 7.9. Press END.Conditions • The times must be programmed in sequence from Time-A to Time-D.Enter a starting time for each time schedule. Select “Disable” for anunnecessary schedule.• You cannot leave the entry empty.Feature References Section 3, Features,Automatic Route Selection (ARS)
