4.5 CO Line ProgrammingIntercept Extension — Day / Night409-410*: Available for KX-TD1232 only. System Programming 4-85Description Intercept Routing provides an automatic re-direction of calls whichcannot or have not been answered. These programs set thedestination in both day and night modes for each line group.Selection • CO line group (TRG) number: 1 through 8,( =all CO line groups)• Extension number: 2 through 4 digits / Disable (no InterceptRouting)Default All CO line groups – Disable — Day / NightProgramming 1. Enter a program address (409 for day or 410 for night).Display example: TRG Intercpt Day2. Press NEXT.Display: TRK GRP NO?—>3. Enter the CO line group number.To enter CO line group number 1, you can also press NEXT.Display example: TRG1:Disable4. Enter an extension number.To change the current entry, press CLEAR and the new number.To disable Intercept Routing, press CLEAR.5. Press STORE.6. To program another CO line group, press NEXT or PREV, orSELECT and the desired CO line group number.7. Repeat steps 4 through 6.8. Press END.Conditions • You set the extension numbers in program [003] “Extension NumberSet” or floating numbers of pagers, DISA* messages in program [813]“Floating Number Assignment.” You cannot assign the floatingnumber of the modem.• To assign all CO line groups to one selection, press the key at step 3.In this case, the display shows the contents programmed for CO linegroup 1.• Program [401] “CO Line Group Assignment” is used to assign each COline to a CO line group.Feature References Section 3, Features,Intercept Routing
