Description Used to enable or disable hunting and set the Station Hunting typefor each extension group. There are four Station Hunting typesavailable: Circular, Termination, Voice Mail (VM), and AutomatedAttendant (AA). If circular hunting is assigned for a group, all theextensions in the group are hunted until an idle one is found. Iftermination hunting is assigned, hunting stops at the extensionwhich has the largest jack number in the group. If VM hunting isassigned, all the VM ports of an extension group are hunted untilan idle one is found to permit Voice Mail Service. If AA hunting isassigned, all the AA ports of an extension group are hunted until anidle one is found to permit AA Service.Selection • Extension group number: 1 through 8, ( =all extensiongroups)• Disable (no hunting) / Terminate (termination) / Circular / VM(voice mail) / AA (automated attendant)Default All extension groups – DisableProgramming 1. Enter 106.Display: Call Hunting2. Press NEXT.Display: EXT GRP NO?–>3. Enter an extension group number.To enter extension group number 1, you can also press NEXT.Display example: Group1: Disable4. Keep pressing SELECT until the desired selection isdisplayed.5. Press STORE.6. To program another extension group, press NEXT or PREV,or SELECT and the desired extension group number.7. Repeat steps 4 through 6.8. Press END.Conditions • Program [602] “Extension Group Assignment” is used to assign theextension group members.• The system supports a maximum of eight jacks (16 jacks during SystemConnection for KX-TD1232) for connection to a Voice ProcessingSystem as VM or AA ports.Feature References Section 3, Features,Station Hunting Voice Mail Integration4.3 System ProgrammingStation Hunting Type106System Programming 4-37
