3 Features RConditions • Redial Repeat Time and Interval Time can be changed by SystemProgramming.• Pressing FLASH allows the system to cancel this feature.• If any dialing operation is done during Automatic Redial, this functionis finished.• This feature is not available with KX-T7055 or KX-T7250.• This feature is not available with KX-TD816NL/1232NL.Programming ReferencesSection 4, System Programming,[209] Automatic Redial Repeat Times[210] Automatic Redial Interval TimeFeature References Section 3, Features,Redial, Last Number Redial, Saved NumberSpecial Features for KX-T7235 – Call LogOperation References DPT Features,—User Manual Redial, AutomaticR edial, Last NumberDescription Every telephone in the system automatically saves the lasttelephone number dialed to a CO line and allows the extensionuser to dial the same number again.Conditions • With a proprietary telephone, REDIAL button is used to carry out LastNumber Redial. With a single line telephone, the feature number isused.• The memorized telephone number is replaced by a new one if at leastone digit to be sent to a CO line is dialed. Dialing a CO line accesscode alone does not change the memorized number.• Certain type of proprietary telephones allows multiple redialingautomatically (Automatic Redial).Programming ReferencesSection 4, System Programming,[100] Flexible Numbering, Last number redialFeature References Section 3, Features,Redial, AutomaticOperation References DPT Features, SLT Features;—User Manual Redial, Last NumberFeatures 3-99
