4.9 Resource ProgrammingFloating Number Assignment813*: Available for KX-TD1232 only. System Programming 4-123Description Assigns the floating numbers for External Pagers, DISA*messages, and the modem.* These numbers can be used the sameway extension numbers are used for station access.Selection • Floating station: KX-TD816 – Pager1KX-TD1232 – Pager1 / Pager2 / Pager3 /Pager4 / DISA1 / DISA2 /MODEM• Floating number: 2 through 4 digitsDefault KX-TD816 – Pager 1=196KX-TD1232 – Pager 1=196; Pager 2=197; Pager 3=296;Pager 4=297; DISA 1=198; DISA 2=298;MODEM=299Programming 1. Enter 813.Display: FLT EXT NO.2. Press NEXT to program Pager 1.Display example: Pager1:EXT196To program another floating station for KX-TD1232, keep pressingNEXT or PREV until the desired floating station is displayed.3. Enter a floating number.To change the current entry, press CLEAR and the new floatingnumber.4. Press STORE.5. To program another floating station, keep pressing NEXT orPREV until the desired floating station is displayed.6. Repeat steps 3 through 5.7. Press END.Conditions • In the case of KX-TD816, skip steps 5 and 6.• A floating number is composed of two through four numerical digits, 0through 9.• The leading one or two digits of the floating numbers are subject toprogram [100] “Flexible Numbering, (01) through (16) 1st through 16thhundred extension blocks.”
