4.10 Option ProgrammingSystem Additional Information (contd.)9904-128 System ProgrammingField(11)(12)(13)(14)(15)(16)(17)DescriptionIf an outside party is transferred andunanswered, assigns whether TransferRecall occurs at the transfer originatingextension or at Operator 1.If Limited Call Duration is enabled inprogram [502] “Extension-to-CO Line CallDuration Limit,” assigns if Limited CallDuration is done for both outgoing andincoming calls or for outgoing calls only.Allows you to remove confirmation tone 4.By default, a beep tone sounds when athree-party conference is started / ended.Determines if the dialed “ ” and “#” willbe checked by Toll Restriction. Thisassignment is required for certain centraloffices (CO) to prevent toll fraud. SomeCO ignore the user-dialed “ ” and “#”. Ifyour CO is such a type, select “0” (nocheck).Enables or disables the Flash function whenreceiving a CO call at a locked or toll-restricted station. Flash, if enabled, allowsthe user to make a CO call using the sameline at the station. This is also allowed forthose extensions that have Account Code –Verified – All Calls mode assigned, if “0”(disconnection signal) is selected in field (3)above.Allows you to remove Confirmation Tone 3.This tone is sent when a conversation isestablished just after dialing the featurenumbers for accessing the followingfeatures: Call Pickup, Paging, PagingAnswer, TAFAS Answer, Hold Retrieve andCall Park Retrieve.A CO line set to pulse or call blocking modein program [402] “Dial Mode Selection” canhave two settings. This assigns the pulsebreak ratio during dial pulsing. Select anappropriate ratio depending on the standardin your country.Selection0 : extension1 : Operator 10 : both calls1 : outgoing callsonly0 : disable1 : enable0 : no check1 : check0 : disable1 : enable0 : disable1 : enable0 : 60 %1 : 67 %Default0011010 for KX-TD816C/HK/NLKX-TD1232C/HK/NL1 for KX-TD816BX/ML/NZ/X, KX-TD1232BX/ML/NZ/XReferencesCall Transfer,Unscreened – toExtensionLimited CallDurationConfirmationToneToll RestrictionFlashConfirmationToneDial TypeSelection
