3 Features SFeatures 3-135System Data Default SetDescription This system permits re-initialization of system-programmed data.If all the programmed data is cleared, the system will restart withthe default setting.Conditions The default setting for each programming item is listed in Section 5.2,“Default Values.”Programming ReferencesNo programming required.Feature References NoneOperation References Section 2, Installation,2.8 System Data ClearSystem Programming and Diagnosis with Personal ComputerDescription This system can be programmed and administered using a personalcomputer. The EIA/Remote Programming & Diagnosis floppy isrequired to perform this feature. The KX-TD816 cannot performthe diagnosis. There are two programming methods:On-Site ProgrammingBy connecting a personal computer (PC) to your system, systemprogramming and maintenance can be performed locally. There aretwo ways available to perform the above:(Method 1.) Using the EIA (RS-232C) portConnect the PC to the EIA (RS-232C) port provided. The mainunit has an EIA (RS-232C) port which can be used for eithersystem administration or SMDR.(Method 2.) Using a modem*Install the optional Remote Card. Connect the PC to an extensionjack. Assign the floating number of the modem in systemprogramming. Dial this number from the PC.Remote ProgrammingYou can perform system programming and maintenance from aremote site using a PC. Install the Remote Card and assign thefloating number of the modem in system programming.Starting system administration from a remote location can be donein the following ways.*: Available for KX-TD1232 only.
