4.2 Manager ProgrammingOperator / Manager Extension Assignment — Day / Night006System Programming 4-25Description Assigns the jack number for a manager and / or operators. Themanager extension can perform system programming. The operatorhas the ability to perform operator services.Selection • OPE-1 (operator 1) (Day / Night) / OPE-2 (operator 2) (Day /Night) / MNGER (manager)• Jack number: KX-TD816 – 01 through 16KX-TD1232 – 01 through 64Default Operator 1 (Day / Night) and Manager – Jack 01;Operator 2 – Not storedProgramming 1. Enter 006.Display: Operator/Manager2. Press NEXT to program Operator 1.Display: OP-1-Day:Jack01To program another item, you can also keep pressing NEXT or PREVuntil the desired one is displayed.3. Enter a jack number.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and the new jack number.4. Press STORE.5. To program another item, press NEXT or PREV.6. Repeat steps 3 through 5.7. Press END.Conditions • Up to two operators and a manager can be programmed.• In the case of KX-TD1232, jack numbers 01 through 32 are for theMaster System and 33 through 64 are for the Slave, if available.• The manager cannot be assigned the jack number of the DSS ConsolePort set in program [007] “DSS Console Port and Paired TelephoneAssignment.”• If the assigned jack is in eXtra Device Port mode, the proprietarytelephone jack is treated as the manager / operator extension.• If there is no operator or manager, press CLEAR in step 3.Feature References Section 3, Features,Manager Extension Operator
