4.2 Manager ProgrammingSystem Speed Dialling Name Set002System Programming 4-19Description Assigns names to the system speed dial numbers assigned inprogram [001] “System Speed Dialling Number Set.” KX-T7235,KX-T7431, KX-T7433 and KX-T7436 telephones show the storedname when performing System Speed Dialling. The stored namesare applied to the CO Incoming Call Information Display / Logfeatures.Selection • Speed dial number: 000 through 499• Name: 10 characters (max.)Default All speed dial numbers – Not storedProgramming 1. Enter 002.Display: SPD Name Set2. Press NEXT.Display: SPD Code?–>3. Enter a speed dial number.To enter speed dial number 000, you can also press NEXT.Display example: 000: Not Stored4. Enter a name.For entering characters, see Section 4.1.3 “Entering Characters.”To delete the current entry, press CLEAR.To change the current entry, press CLEAR and the new name5. Press STORE.6. To program another speed dial number, press NEXT orPREV, or SELECT and the desired speed dial number.7. Repeat steps 4 through 6.8. Press END.Conditions • Speed dial numbers are programmed in program [001] “SystemSpeed Dialling Number Set.”• There is a maximum of 500 names. Each name has a maximum of 10characters.• To go to another speed dial number at steps 3 through 6, pressSELECT and start with step 3.Feature References Section 3, Features,CO Incoming Call Information DisplayCO Incoming Call Information LogSpecial Display Features — System Speed Dialling
