4.3 System ProgrammingDDI Removed Digit / Added Number Assignment1114-49.1 System ProgrammingDescription Assigns the removed digits and added number to a subscriber’snumber and the DDI number sent from the network to make theextension which receives a call.Selection • CO line number: KX-TD816 – 01 through 08, ( =all CO lines)KX-TD1232 – 01 through 24, ( =all CO lines)• Removed digit: 0 through 16 (0=no deleting)• Added number: 4 digits (max.)Default All CO Lines – Removed digit=0; Added number=Not storedProgramming 1. Enter 111.Display: DDI Removed/Add2. Press NEXT.Display: CO Line NO?→3. Enter a CO line number.To enter CO line number 01, you can also press NEXT.Display example: CO01: 0,4. Enter the digit(s) to be deleted.To change the current entry, press CLEAR and enter the new number.5. Press .Display example: CO01: 3,6. Enter the number(s) to be added.To change the current entry, press CLEAR and enter the new number.7. To program another CO line, press NEXT or PREV, orSELECT and the desired CO line number.8. Press STORE.9. Press END.Conditions • To assign all CO lines to one, press the key in step 3. In this case,the display shows the contents programmed for CO01.• Example:If the removed digits are assigned as “6” and the added number isassigned as “ 2,” the number sent from the network is changed asfollows: 85492603 (DDI number: 2 digits)Six digits are deleted and “2” is added, and the number becomes “203.”• This program is available when the program [990] Field (38) is assignedto use this program.Feature References Section 3, Features,Direct Dialling In (DDI)
