3 Features AFeatures 3-3In Verified-All Calls mode, the user must always enter a pre-assigned account code when making any of the following callsunless it has previously been stored in memory:• Call Forwarding – to CO Line• Last Number Redial• Line Access• Notebook Function• One-Touch Dialling• Pickup Dialling• Saved Number Redial• Station Speed Dialling• System Speed DiallingIn Verified-Toll Restriction Override mode, the user can enter a pre-assigned account code only when the user needs to override tollrestriction.In Option mode, the user can enter any account code if needed.Conditions • An account code can be stored into Memory Dialling (System / StationSpeed Dialling; Notebook Function; One-Touch Dialling; PickupDialling; Call Forwarding – to CO Line).• The Account button may be used in place of the feature number. Aflexible button on the proprietary telephone set can be programmed asthe Account button.• Account code entry after CPC detection must be done within 15seconds. Otherwise, SMDR call record is activated and entry becomesimpossible afterwards.• If disconnection signal is selected in program [990], field (3) and Recallfunction is enabled in field (15), the Verified-All Calls extension isallowed to make an outside call using the same line with Recallfunction.• If an account code is appended to a call, specified display telephoneusers can see the charge for the call (Charge Fee Reference).• In any mode, emergency dial numbers stored in program [311]“Emergency Dial Number Set” can be dialled out without an accountcode entry.• If the account code stored in location 01 of the programming table isused, the dialled number is not printed out to SMDR (Private Call).Programming ReferencesSection 4, System Programming,[005] Flexible CO Button Assignment[100] Flexible Numbering, Account code entry[105] Account Codes[508] Account Code Entry Mode[990] System Additional Information, Fields (3), (15)
