Panasonic KX-TDA0480 Installation Manual

Also see for KX-TDA0480: Getting started Getting started guide Getting started

Contents

PlanningInstallation Manual 29Unit Identification InformationUse the unit identification information line to record information used to identify a Group towhich a unit belongs, and to identify the individual unit.Group NameUse the Group Name field to assign a group in which to create and store the KX-TDA0480 inthe Maintenance Console Software.Each KX-TDA0480 must be assigned to a Group. The New Group command is used to enterthis information in the Maintenance Console Software. This must be done before units(Gateways) can be created.The Unit Name field allows for entry of an unrestricted alphanumeric string.In the sample worksheet, the Group Name is New York.Unit NameUse the Unit Name to enter a name to be associated with a unit (Gateway) in the MaintenanceConsole Software. The Maintenance Console Software requires this information before a unitcan be defined and configured using the Maintenance Console Software.The Unit Name field allows entry of an unrestricted alphanumeric string.In the sample worksheet, the Unit Name is NY01.GeneralUse the General section of the worksheet to record unit IP addressing and password accessinformation.See Appendix A1 Voice Over IP Addressing.Unit IP (VHUB_IP)Use this field to record a unit's unique IP address.This address must conform to Internet Protocol addressing requirements, e.g.nnn.nnn.nnn.nnn, where nnn = a value of 0 to 255 excluding 0.0.0.0 and 255.255.255.255. Thedefault setting is 192.168.1.200.IP addressing information is typically supplied by a network administrator.In the sample worksheet the Unit IP is recorded as the default address, 133.149.1.91.