Panasonic KX-TG2258CS Operating Instructions Manual

Contents

Programmable Functions12Useful information:• If Select is pressed while “---(Go back)---” is displayed, the unit will goback to the previous menu mode. If you press the key in the main menu, the unitwill exit programming mode.• After programming is complete, the display will return to the main menu or thesub-menu depending on which menu the selected item is located. (See the menutable below.)• You can exit programming mode at any time by pressing [OFF].• If you do not press any buttons for 60 seconds, the handset will exit programmingmode.• If the handset has lost communication with the base unit, the handset beeps 3 timesand “No link to base. Place on cradle and try again.” is displayed.• If [ ], [ ] or any other buttons except [MUTE] and [OFF] is pressed while thehandset is on the base unit, the handset beeps 3 times and “Please lift upand try again.” is displayed. Lift the handset and press the button again.Function Menu TableYou can use the following functions to customize your unit. See the correspondingpages for function details.• After pressing [MENU], you can also program menu items by direct commands([0] to [9]) instead of using the soft keys (p. 56).Set dial modeRinger volumeSet line modeRinger toneMain menu Sub-menu I Sub-menu IIRinger settingMessage playDate and timeVoice enhancerIntercomTalk Caller IDInitial settingNumber of ringsRecording timeRemote codeRecording modeLCD contrastSet tel lineChange languageAuto talkC.WTG optionsSet flash timeSet answeringp. 14p. 44p. 14p. 22p. 21p. 51p. 47p. 13p. 15p. 38p. 16p. 18p. 19p. 17p. 16p. 9p. 22p. 41✿✤✦✪✣✮ ✥ ❇ ✤✥