Preparing the Answering System22Number of RingsYou can select the number of times the unit rings before the Answering Systemanswers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”.Recording ModeYou can select the recording mode, “Enhanced recording (8min)” or “Standardrecording (17min)”. If you require clearer sound to listen to the messages, select“Enhanced recording (8min)”. If you select this mode, the total recording time is8 minutes. If you require longer recording time, select “Standard recording (17min)”(the factory preset).1 Follow steps 1 to 3 of “Caller’s RecordingTime” on page 21.2 Press Select at “Number of rings”.3 Select the number of rings by pressing [ ] or[ ].• You can also select the number of rings bypressing [0] (Toll saver*), or [2] to [7].4 Press Save, then press [OFF].*Toll saverWhen you call the unit from a remote operation, the number of rings will tell youif there are any new messages. If the unit answers on the 2nd ring, there is atleast one new message. If the unit answers on the 4th ring, there are no newmessages. To save the toll charges for the call, hang up immediately when youhear the 3rd ring. The 3rd ring indicates that there are no new messages.1 Follow steps 1 to 3 of “Caller’s RecordingTime” on page 21.2 Scroll to “Recording mode” by pressing [ ]or [ ], then press Select.3 Select the recording mode by pressing [ ] or[ ].4 Press Save, then press [OFF].HandsetNumber of ringsBack Select>>>> Number of rings:4Back Save>>Handset>> Recording modeBack Select>>>> Standardrecording(17min)Back Save>>✿✤✦✪✣✮ ✥ ❇ ✥✥