Panasonic KX-TG2258CS Operating Instructions Manual

Contents

Using the Caller List30Viewing the Caller List• If there is no name information of a caller, the display will only show the phonenumber.• If you do not press any buttons for 60 seconds, the unit will exit the Caller List.What “√” means“√” indicates that you have already viewed this callinginformation, answered the call, called back the caller orplayed back the message (p. 46, 47). If the same callercalls again, the call entry with “√” will be replaced with thenew call entry.If a caller calls more than onceThe number of times the same caller called is displayed(“X2” to “X9”). The date and time of the most recent callwill be recorded. After viewing a caller’s information, “X2”to “X9” will be replaced with “√”.Calling Back from the Caller List• In some cases, you may have to edit the number before dialing (p. 31).(e.g. You may have to add “1” for long distance calls.)• If a phone number is not displayed in the caller information, you cannot call backthat caller from the Caller List.1 Press Rcvd calls to enter the Caller List.• You can also enter by pressing [ ] or [ ].2 To search from the most recent call, press [ ].To search from the oldest call, press [ ].• The caller’s name, number and the time and datereceived are displayed. Name and phone numberare alternately displayed as shown on the right.3 To exit the list, press [OFF].1 Press Rcvd calls to enter the Caller List.• You can also enter by pressing [ ] or [ ].2 Scroll to the desired caller by pressing [ ] or [ ].3 Press [ ] or [ ].• The phone number is dialed.Handset>> 2 missed callsRcvd Phonecalls book2 missed calls=Scroll list>>>> SMITH,JACK3:10P JAN.29Erase Select555-333-44443:10P JAN.29Erase SelectExampleSMITH,JACK3:10P JAN.29 √TURNER,CINDY11:20A JAN.12 X2Handset>> >>✿✤✦✪✣✮ ✧ ❇ ✦✣ !