Panasonic KX-TG5200C Operating Instructions Manual

Also see for KX-TG5200C: Operating instructions

Contents

Panasonic KX-TG5200C Operating Instructions Manual Manual pdf 12 page image

Installation12RechargeRecharge the battery when:— “Recharge battery” is displayed on the handset,— “3” flashes, or— the handset beeps intermittently while it is in use.• The display will continually indicate “Recharge battery” and/or “3” willflash when the handset battery is charged for less than 15 minutes and thehandset is lifted off the base unit.• If the battery has been discharged, the handset will display “Charge for 6 HRS”and “4” when you place the handset on the base unit. The handset will notwork unless the battery is charged. Continue charging.A nickel metal hydride battery that is recyclable powers the productyou have purchased. Please call 1-800-8-BATTERY forinformation on how to recycle this battery.Battery informationAfter your Panasonic battery is fully charged, you can expect the following performance:• A fully charged battery will give you up to 5 hours of continuous talk time, or keepyour handset in Standby mode to receive incoming calls for up to 11 days (if nophone calls are made). Battery power is consumed whenever the handset is offthe base unit, even when the handset is not in use. The longer you leave thehandset off the base unit, the time you can actually talk on the handset will beshortened. Actual battery performance depends on a combination of how oftenthe handset is in TALK mode and how often it is in Standby mode.• Clean the charge contacts of the handset and the base unit with a soft, drycloth once a month. Clean more often if the unit is subject to grease, dust orhigh humidity, otherwise, the battery may not charge properly.• If the battery is fully charged, you do not have to place the handset on the baseunit until “Recharge battery” is displayed and/or “3” flashes. This willmaximize the battery life.• If you want to keep the battery fully charged at all times, place the handset on thebase unit when the handset is not being used. The battery cannot beovercharged.• When the Clarity Booster feature is turned on automatically or manually, batteryoperating time may be shortened (p. 22).Battery replacement :If you cleaned the charge contacts and fully charged the battery, but after a fewtelephone calls, “Recharge battery” is displayed and/or “3” continues toflash, or “Charge for 6 HRS” and “4” are displayed, the battery may needto be replaced. Please replace with a new Panasonic HHR-P104 battery.To replace the battery, see page 11.Operation Operating timeWhile in use (TALK) Up to 5 hoursWhile not in use (Standby) Up to 11 daysWhile using the Clarity Booster feature (p. 22) Up to 3 hoursSPIPRIVACY3Recharge batteryIN USE [1 ]TG5200CE.fm.fm Page 12 Tuesday, March 23, 2004 11:37 AM