Useful InformationAnswering SystemPreparation55Cancelling Registration/Re-registrationTelephone System• You can stop registration by pressing [OFF] on the handset and pressingLOCATOR [ ], [ ], [ ], [ ] or [ ] on the base unit.• If “Wrong handset Refer to manual” is displayed, the handset you tried toregister is for KX-TG6500C base unit, not the KX-TG5200C base unit includedwith this system. The accessory handsets for this base unit are KX-TGA520C andKX-TGA523C.If you have cancelled handset registration at a previous base unit (p. 54), startfrom step 5.1 Handset: Press [MENU].2 Handset: Scroll to “Initial setting” bypressing [d] or [B], then press the soft key( ).3 Handset: Scroll to “Registration” bypressing [d] or [B], then press the soft key( ).4 Handset: Press the soft key ( ) at “HSregistration”.5 Base unit: Press and hold LOCATOR [ ], [ ], [ ], [ ] or [ ] for 3seconds.• The CHARGE indicator flashes. After the CHARGE indicator starts flashing,the rest of the procedure must be completed within 1 minute.6 Handset:(1) Press the soft key ( ).(2) Wait until a long beep sounds and thedisplay shows the new extension number(e.g. extension number 2).• Registration is complete.If you have not cancelled the handset’s registration at the previous base unit(p. 54), the handset number remains in that base unit’s memory. To erase thehandset number from the previous base unit, see the base unit’s OperatingInstructions. For the KX-TG5200C base unit: (1) Press and hold LOCATOR[ ] until the CHARGE indicator flashes, and (2) Press and hold LOCATOR[ ], [ ], [ ] or [ ] for the handset that you do not want until the CHARGEindicator flashes rapidly. When the indicator stops flashing, the handset numberis erased.SELECTInitial settingSELECTRegistrationSELECTHS registrationO KPress LOCATORon base unitfor 3 sec.Then press OKBOX 1 FRANÇ. O KSPIPRIVACY1Handset [2]RegisteredIN USE [2 ]TG5200CE.fm.fm Page 55 Tuesday, March 23, 2004 11:37 AM