Panasonic KX-TG5200C Operating Instructions Manual

Also see for KX-TG5200C: Operating instructions

Contents

Panasonic KX-TG5200C Operating Instructions Manual Manual pdf 47 page image

Useful InformationAdvanced OperationPreparation47Special FeaturesTelephone SystemUsing the PAUSE Button (For PBX Line/Long Distance Calls)We recommend that you press the soft key ( ) if a pause is required for dialingwith a PBX or to make a long distance call.• “ ” is displayed on the handset only when dialing before pressing [C] or[s] (p. 21), or storing numbers in the phone book (p. 29).e.g. Line access number [9] (PBX)[9] N Soft key ( ) N• Pressing the soft key ( ) once creates a 3.5 second pause. This preventsmisdialing when you dial after confirming the entered number (p. 21) or dial astored number (p. 31, 32).• Pressing the soft key ( ) more than once increases the length of the pausebetween numbers.FLASH ButtonPressing [FLASH/CALL WAIT] allows you to use special features of your host PBXsuch as transferring an extension call, or accessing optional telephone servicessuch as Call Waiting.• Pressing [FLASH/CALL WAIT] cancels mute (p. 42) or the Temporary ToneDialing mode (p. 43).Selecting the flash timeThe flash time depends on your telephone exchange or host PBX.You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90ms (milliseconds)”. The factory preset is “700 ms”.• If PBX functions do not work correctly, consult your PBX supplier for the correctsettings.1 Press [MENU].2 Scroll to “Initial setting” by pressing[d] or [B], then press the soft key ( ).3 Scroll to “Set tel line” by pressing [d] or[B], then press the soft key ( ).4 Scroll to “Set flash time” by pressing [d]or [B], then press the soft key ( ).5 Select the flash time by pressing [d] or [B].6 Press the soft key ( ), then press [OFF].HandsetPAUSEPAUSEPAUSE Phone numberPAUSEPAUSEHandsetHandsetSELECT Initial settingSELECT Set tel lineSELECT Set flash timeSet flash time:700msSAVETG5200CE.fm.fm Page 47 Tuesday, March 23, 2004 11:37 AM