Panasonic KX-TG5200C Operating Instructions Manual

Also see for KX-TG5200C: Operating instructions

Contents

Panasonic KX-TG5200C Operating Instructions Manual Manual pdf 13 page image

Useful InformationAnswering SystemTelephone System13PreparationProgrammable SettingsProgramming GuidelinesThis unit has several programmable functions which can be selected from thefunction menu on the display (p. 14).How to select a function item from the menu• To go back to the previous menu, press the soft key ( ), or press the soft key( ) while “---(Go back)----” is displayed. If you press this key in themain menu, the unit will exit programming mode.• After programming is complete, the display will return to the main menu or thesub-menu depending on the menu in which the selected item is located. (See themenu table on page 14.)• You can exit programming mode at any time by pressing [OFF].• If you do not press any button for 60 seconds, the unit will exit programming mode.• If the unit detects a problem, an error message will be displayed (p. 56–57) and/orerror beeps will sound.Make sure the handset and base unit are not being used. The handset mustbe operated near the base unit and while off the base unit.1 Press [MENU].• The main menu is displayed (p. 14).2 Scroll to the desired item by pressing [d] or [B].3 Press the soft key ( ) to select the desired item.4 If the item has a sub-menu, select the menu item (p. 14).Repeat steps 2 and 3 until the desired item is displayed.If the item has no sub-menu, go to step 5.5 Select the desired setting by pressing [d] or[B], then press the soft key ( ).• A confirmation tone will be heard and the settingwill be saved.6 Press [OFF] to exit programming mode.HandsetSAVESAVEBACKBACKSAVE[OFF] exitsprogramming.Navigator key scrollsthrough the menu. [MENU] enters thefunction menu.The soft key works asthe or key.The soft key worksas the key.BACK SAVESELECTBRinger settingdBACK PLAY SELECTSELECTSAVEdBBACK PLAY SAVEBACKSELECTTG5200CE.fm.fm Page 13 Tuesday, March 23, 2004 11:37 AM