Making calls1 Lift the handset and dial the phonenumber.R To correct a digit, press .2 Press M N or .3 When you finish talking, pressM N or place the handset on the baseunit or charger.Using the speakerphone1 Dial the phone number and press M N.R Speak alternately with the other party.2 When you finish talking, pressM N.Note:R For best performance, use thespeakerphone in a quiet environment.R To switch back to the receiver, press M N/M N.Adjusting the receiver or speakervolumePress MDN or MCN repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialled are storedin the redial list (each 24 digits max.).1 (right soft key) or MEN ( )2 MbN: Select the desired phone number.3 M NErasing a number in the redial list1 (right soft key) or MEN ( )2 MbN: Select the desired phone number.a3 MbN: “Yes” a a M NPause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 21).Example: If you need to dial the line accessnumber “0” when making outside calls with aPBX:1 0 a2 Dial the phone number. a M NNote:R A 3 second pause is inserted each timeis pressed. Repeat as needed tocreate longer pauses.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press M N or M Nwhen the unit rings.R You can also answer the call bypressing any dial key from 0 to 9,*, or #. (Any key answer feature)2 When you finish talking, pressM N or place the handset on the baseunit or charger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. You donot need to press M N. To turn this featureon, see page 26.Adjusting the handset ringer volumen While the handset is ringing for anincoming call:Press MDN or MCN repeatedly to select thedesired volume.n Programming the volume beforehand:1 (middle soft key) #1602 MbN: Select the desired volume.16Making/Answering CallsTG80xxAL_NZ(en)_1021_ver001-2.pd16 16 2011/10/21 15:09:42