*9 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing anykeys, including confirmation tones and error tones.*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.You can access your service provider/telephone company “call waiting” service by havingthe recall/flash time set at “100 msec.”, and then follow your service provider/telephonecompany “call waiting” instructions to operate this service. (for Australia)*12 For New Zealand*13 For Australia*14 To prevent other users from joining your conversations with outside callers, turn this featureon.Special programmingAlarmAn alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset.Important:R Set the date and time beforehand(page 15).1 (middle soft key) #7202 MbN: Select the desired alarm option. a“Off”Turns alarm off. Go to step 6.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 4.3 Enter the desired date and month. a4 Set the desired time. a5 MbN: Select the desired alarm tone. aR We recommend selecting a differentringer tone from the one used foroutside calls.6 a M NR When the alarm is set, is displayed.Note:R To stop the alarm, press M N or placethe handset on the base unit or charger.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.Night modeNight mode allows you to select a period oftime during which the handset will not ring foroutside calls. This feature is useful for timeperiods when you do not want to be disturbed,for example, while sleeping. Night mode canbe set for each handset.Using the phonebook’s category feature(page 20), you can also select categories ofcallers whose calls override night mode andring the handset (Caller ID subscribers only).Important:R Set the date and time beforehand(page 15).R We recommend turning the base unit ringeroff (page 25) in addition to turning the nightmode on.R If you have set the alarm, the alarm soundseven if the night mode is turned on.Turning night mode on/off1 (middle soft key) #23827ProgrammingTG80xxAL_NZ(en)_1021_ver001-2.pd27 27 2011/10/21 15:09:42