Panasonic KX-TG8032AL Operating Instructions Manual

Also see for KX-TG8032AL: Operating instructions

Sub-menu 1 Sub-menu 2 Settings CodeArea Code*1 – – #255 29Call Restrict*1 – – #256 29Auto Talk*10 – 1: On 0: <Off> #200 16Line Setup Recall/Flash*1, *11 0: 900 msec.1: 700 msec.2: <600 msec. >*123: 400 msec.4: 300 msec.5: 250 msec.G: 200 msec.#: 160 msec.6: 110 msec.7: <100 msec.>*138: 90 msec.9: 80 msec.#121 17Privacy Mode*1, *14 – 1: On 0: <Off> #194 –Base Unit PIN*1 – <0000> #132 30Repeater Mode*1 – 1: <On> 0: Off #138 44Register Register H.set – #130 30Cancel Register*2 – #131 30Power Failure – 1: <Auto> 0: Off #152 18Language Display <English> #110 14*1 If you program these settings using one of the handsets, you do not need to program thesame item using another handset.*2 This menu is not displayed when scrolling through the display menus. It is only available indirect command code.*3 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.(Caller ID subscribers only)To use this feature, set the date and time first (page 15).*4 Ringer volume cannot be turned off for alarm, intercom calls, and paging.*5 If you select one of the melody ringer tones, the ringer tone continues to play for severalseconds even if the caller has already hung up. You may either hear a dial tone or no one onthe line when you answer the call.*6 The preset melodies in this product are used with permission of © 2011 Copyrights VisionInc.*7 You can set the wallpaper to display with or without date and time by pressing . Thedefault setting is with date and time displayed.*8 You can set the handset display backlight while on charge.– “On”: Backlight is on (dimmed).– “Off”: Backlight turns off after 10 seconds of charging.26ProgrammingTG80xxAL_NZ(en)_1021_ver001-2.pd26 26 2011/10/21 15:09:42