Panasonic KX-TGD890 Operating Instructions Manual

Also see for KX-TGD890: Operating instructions

Unpairing a Bluetooth headphoneYou can remove the Bluetooth headphoneinformation stored in your handset.1 Press MPAIRN. a MbN: Select the desiredheadphone. a MSELECTN2 MbN: “Unpair” a MSELECTN3 MbN: “Yes” a MSELECTNR A long beep sounds.4 MOFFNChanging the headphone nameThe name of the paired headphone will bedisplayed while talking using a Bluetoothheadphone or in the headphone list. You cancustomize the name of paired Bluetoothheadphones.1 Press MPAIRN. a MbN: Select the desiredheadphone. a MSELECTN2 MbN: “Change name” a MSELECTN aEnter the desired name (16 charactersmax.).3 MSAVEN a MOFFNNote:R When the headphone is unpaired, theheadphone name stored in the handset willbe deleted.Changing the Bluetooth PIN(Personal Identification Number)The PIN is used to pair the headphone to thehandset. The default PIN is “0000”. If yourheadphone PIN is not “0000”, change theBluetooth PIN beforehand.Important:R Please make note of your new PIN. Theunit will not reveal the PIN to you. If youforget your PIN, see page 66.1 MMENUN #645R If the unit prompts you to enter the oldPIN (When the default has beenchanged), enter the current 4-digit PIN.2 Enter the new 4-digit PIN. a MOKN3 Enter the new 4-digit PIN again. aMSAVEN a MOFFNOperating a BluetoothheadphoneImportant:R Refer to your headphone’s operatinginstructions for details.R Some features described here may not beavailable depending on Bluetoothheadphone.R Make sure that the headphone is turned on.Making calls with your headphoneImportant:R Only 1 Bluetooth headphone can be usedwith the unit at a time.R Make sure that the Bluetooth headphone isnot connected to another Bluetooth device.1 Lift the handset and then dial the phonenumber.R To correct a digit, press MCLEARN.2 Press MPAIRN.R The unit starts dialing immediately ifonly 1 Bluetooth headphone is pairedand connected. Go to step 4.3 If 2 or more Bluetooth headphones arepaired,MbN: Select the desired headphone. aMSELECTNR The unit starts dialing immediately if noother Bluetooth headphone isconnected.R If the selected headphone is other thanthe one already connected, the unitprompts you to disconnect theBluetooth connection with the currentheadphone. a MYESN4 When you finish talking, press MOFFN orpress your headphone’s button referringto your headphone’s operatinginstructions.Note:R is displayed on the handset.*118 For assistance, please visit http://shop.panasonic.com/supportUsing Bluetooth® Headphone