Panasonic KX-TGD890 Operating Instructions Manual

Also see for KX-TGD890: Operating instructions

Call blockProblem Cause/solutionThe dedicated key forTelemarketing call block is notdisplayed.R While on charger, the MTELE.BLK.N key is not available.Lift the handset from the charger.R If Auto talk feature is set to on, the call is answeredautomatically when the handset is lifted from the chargerduring an incoming call. Turn off the auto talk feature(page 40).Caller ID/Talking Caller IDProblem Cause/solutionCaller information is notdisplayed.R You must subscribe to Caller ID service. Contact yourphone service provider for details.R If your unit is connected to any additional telephoneequipment such as a Caller ID box or cordless telephoneline jack, plug the unit directly into the wall jack.R If you use a DSL/ADSL service, we recommendconnecting a DSL/ADSL filter between the base unit andthe telephone line jack. Contact your DSL/ADSL providerfor details.R The name display service may not be available in someareas. Contact your phone service provider for details.R Other telephone equipment may be interfering with thisunit. Disconnect the other equipment and try again.Caller information is displayedor announced late.R Depending on your phone service provider, the unit maydisplay or announce the caller’s information at the 2ndring or later.R Move closer to the base unit.Caller information is notannounced.R The ringer volume is turned off. Adjust the ringer volume(page 38).R The Talking Caller ID feature is turned off. Turn it on(page 38).R The number of rings for the answering system is set to “2rings” or “Toll saver”. Select a different setting(page 54).The caller list/incoming phonenumbers are not editedautomatically.R The Caller ID number auto edit feature is turned off. Turnit on and try again (page 40).R You need to call back the edited number to activate CallerID number auto edit.I cannot dial the phone numberedited in the caller list.R The phone number you dialed might have been editedincorrectly (for example, the long distance “1” or the areacode is missing). Edit the phone number with anotherpattern (page 48).Time on the unit has shifted. R Incorrect time information from incoming Caller IDchanges the time. Set the time adjustment to “Manual”(off) (page 38).For assistance, please visit http://shop.panasonic.com/support 63Useful InformationKX-TGD890_892_(en-us)_0713_ver310.pdf 63 7/14/2022 10:42:31 AM