Problem Cause/solutionSome Bluetooth headphonescan only be connected to onedevice at a time.If you want to use these typesof Bluetooth headphonesmainly by connecting asmartphone, you candisconnect the Bluetoothheadphones automatically afterthe call has ended.*1R By setting below function, you may be able toautomatically reconnect the Bluetooth headphones toyour smartphone when the call is ended with Panasonichandset KX-TGDA99.Connection after the call:You can set to disconnect the Bluetooth headphoneconnection after the call has ended. The default setting is“Stay connected”.1 MMENUN#6442 MbN: “Disconnect” a MSAVEN3 MOFFN(For example, if you want to use the same Bluetoothheadphone with your smartphone and KX-TGDA99alternately).– If you select “Stay connected”: The Bluetoothheadphones will be connected to the Panasonic handset.However, in order for you to connect that Bluetoothheadphones back to your smartphone, you have tomanually enter the smartphone Bluetooth settings andselect the headphones to connect.– If you select “Disconnect”: After the call, the Bluetoothheadphones will be disconnected from the Panasonichandset and it will automatically be connected to yoursmartphone.Note:R In some cases when “Disconnect” is selected,during an incoming call when you press MPAIRN button,it might take some time to connect to the headphone.*2However, the handset speaker is turned on so that youdo not miss the call. During this time “Connecting”will be displayed on the handset. Once the Bluetoothconnection is established, the call will automaticallyswitched to headphone.*1 This feature depends on the Bluetooth headphone/smartphone specifications.*2 If 2 or more Bluetooth headphones are paired, MbN: Select the desired headphone. aMSELECTNFor assistance, please visit http://shop.panasonic.com/support 65Useful Information