Panasonic KX-TGD890 Operating Instructions Manual

Also see for KX-TGD890: Operating instructions

Resetting to a pre-recorded greetingmessageUse this procedure to erase your greetingmessage and use a pre-recorded one.1 MMENUN#3042 MYESN a MOFFNPlaying back the greetingmessage1 MMENUN#3032 To exit, press MOFFN.Listening to messagesImportant:R When using the base unit or handset tolisten to messages, the noise reductionfeature (page 22) is activated automaticallyin spite of the setting ( is notdisplayed).Using the base unitWhen new messages have been recorded,the message indicator ( ) on the base unitflashes.Press M N (PLAY).R During playback, the message indicator( ) on the base unit lights.R If new messages have been recorded, thebase unit plays back new messages.R If there are no new messages, the baseunit plays back all messages.Operating the answering systemduring playbackKey OperationMjN or MkN Adjust the speakervolumeM N Repeat message*1M N Skip messageM N (STOP) Stop playbackKey OperationMERASEN Erase currently playingmessage*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.Erasing all messagesPress MERASEN 2 times while the unit is not inuse.Using the handsetWhen new messages have been recorded,“New message” is displayed.1 To listen to new messages:MMENUN#323To listen to all messages:MMENUN#3242 When finished, press MOFFN.Note:R To switch to the receiver, press MTALK/ZN.R You can also use the MPLAYN soft key, ifdisplayed, to play new messages.Operating the answering systemMMENUN a MbN: “Answering device” aMSELECTNKey OperationMDN or MCN Adjust the receiver/speakervolume (during playback)1 or MFN Repeat message (duringplayback)*12 or MEN Skip message (duringplayback)3 Enter the “Settings” menu4 Play new messages5 Play all messages6 Play greeting message76 Record greeting message8 Turn answering system onMPAUSEN Pause message*250 For assistance, please visit http://shop.panasonic.com/supportAnswering System