Panasonic KX-TGF340 Operating Instructions Manual

Panasonic KX-TGF340 Operating Instructions Manual Manual pdf 41 page image

Viewing the caller list and callingbackHandset / Base unit1 Proceed with the operation for your unit.Handset: MCN CIDBase unit: MCIDN2 Press MCN to search from the most recentcall, or MDN to search from the oldest call.3 Proceed with the operation for your unit.Handset:– To call back, press M N.– To exit, press MOFFN.Base unit:– To call back, press MZN.– To exit, press MEXITN.Note:R If the entry has already been viewed oranswered, “ ” is displayed.Editing a caller’s phone numberYou can edit a phone number in the caller listby removing its area code and/or the longdistance code “1”.Handset1 MCN CID2 MbN: Select the desired entry. a MMENUN3 MbN: “Edit” a MSELECTN4 Press MEDITN repeatedly until the phonenumber is shown in the desired format.5 M NBase unit1 MCIDN2 MbN: Select the desired entry.3 Press MEDITN repeatedly until the phonenumber is shown in the desired format.4 MZNCaller ID number auto edit featureHandset / Base unitOnce you call back an edited number, the unitwhich was used to call back remembers thearea code and format of the edited number.The next time someone calls from the samearea code, caller information is customized bythe unit as follows:– When the call is being received, the CallerID number is displayed in the same formatas the edited number.– After the call has ended, the caller’s phonenumber is displayed in the same format asthe edited number, when reviewed from thecaller list.For example, you can use this feature to setthe unit to ignore the area code of callers inyour area, so that you can call these localnumbers using caller information withoutdialing the area code.To activate this feature, you must edit an entryin the caller list, then call that number. Afterthat, phone numbers from that caller’s areacode are edited automatically.This feature can be set for each unit (page 31,34). The default setting is “On”.Note:R Phone numbers from the 4 most recentlyedited area codes are automatically edited.Erasing selected callerinformationHandset / Base unit1 Proceed with the operation for your unit.Handset: MCN CIDBase unit: MCIDN2 MbN: Select the desired entry.3 MERASEN a MbN: “Yes” a MSELECTN4 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNFor assistance, please visit www.panasonic.com/support 41Caller ID ServiceTGF34x_en_1201_ver043.pdf 41 2014/12/01 16:22:19