phone service provider to deactivate yourvoicemail service.If your phone service provider cannot dothis:– Set this unit’s “Ring count” setting sothat this unit’s answering systemanswers calls before the voicemailservice of your phone service providerdoes. It is necessary to check thenumber of rings required to activate thevoicemail service provided by yourphone service provider before changingthis setting.– Change the number of rings of thevoicemail service so that the answeringsystem can answer the call first. To doso, contact your phone service provider.Caller’s recording timeYou can change the maximum messagerecording time allowed for each caller. Thedefault setting is “3 min”.Handset1 MMENUN#3052 MbN: Select the desired setting. aMSAVEN a MOFFNSelecting “Greeting only”You can select “Greeting only” which setsthe unit to announce a greeting message tocallers but not record messages.Select “Greeting only” in step 2 on“Caller’s recording time”, page 49.Note:R When you select “Greeting only”:– If you do not record your own message,the unit will play the pre-recordedgreeting-only message asking callers tocall again later.– If you use your own message, record thegreeting-only message asking callers tocall again later (page 43).For assistance, please visit www.panasonic.com/support 49Answering SystemTGF34x_en_1201_ver043.pdf 49 2014/12/01 16:22:19