Description Specifies the STUN username to be used in Binding Requests (only ifmessage integrity has been requested by the STUN server).Note• If the value for this setting is an empty string, the CPE must notsend STUN Binding Requests with message integrity.Value Range Max. 256 characters (except ", &, ', :, <, >, and space)Default Value Empty stringANNEX_G_STUN_PASSValue Format StringDescription Specifies the STUN password to be used in computing theMESSAGE-INTEGRITY attribute used in Binding Requests (only ifmessage integrity has been requested by the STUN server). Whenread, this parameter returns an empty string, regardless of the actualvalue.Value Range Max. 256 characters (except ", &, ', :, <, >, and space)Default Value Empty stringANNEX_G_STUN_MAX_KEEP_ALIVEValue Format IntegerDescription Specifies the maximum period, in seconds, that STUN BindingRequests must be sent by the CPE for the purpose of maintaining thebinding in the Gateway. This applies specifically to Binding Requestssent from the UDP Connection Request address and port.Note• This setting is available only when"ANNEX_G_STUN_ENABLE" is set to "Y".Value Range 1–3600Default Value 300ANNEX_G_STUN_MIN_KEEP_ALIVEValue Format IntegerDocument Version 2013-02 Administrator Guide 1634.3.6 Management Server Settings
