3. [ ]/[ ]: Select "Enable VLAN" ®4. [ ]/[ ]: Select "Yes" ®• Select "No" to disable VLAN settings.5. Base unit: [ ]Handset: [ ]To set VLAN for IP Phone/PC (KX-TGP55x only)In cases when buttons/soft key icons are shown in English alphabet1. Base unit: [MENU] (middle soft key) ® [#][5][3][0]Handset: [MENU] (center of joystick) ® [#][5][3][0]2. [ ]/[ ]: Select "VLAN setting" ® [SELECT]3. [ ]/[ ]: Select "IP Phone" or "PC" ® [SELECT]4. [ ]/[ ]: Select "VLAN ID" ® [SELECT]5. Use the dial keys to enter the VLAN ID (1–4094).6. [SAVE]7. [ ]/[ ]: Select "Priority" ® [SELECT]8. Use the dial keys to enter the priority value (0–7 [7: highest priority]).9. [SAVE]10. Base unit: [EXIT]Handset: [OFF]In cases when buttons/soft key icons are shown in symbols/pictures1. Base unit: (middle soft key) ® [#][5][3][0]Handset: (center of joystick) ® [#][5][3][0]2. [ ]/[ ]: Select "VLAN setting" ®3. [ ]/[ ]: Select "IP Phone" or "PC" ®4. [ ]/[ ]: Select "VLAN ID" ®5. Use the dial keys to enter the VLAN ID (1–4094).6.7. [ ]/[ ]: Select "Priority" ®8. Use the dial keys to enter the priority value (0–7 [7: highest priority]).9.10. Base unit: [ ]Handset: [ ]Note• After you have finished configuring the settings, the base unit will restart automatically once the baseunit or handset returns to idle.2.1.4 IP ResetIP Reset returns the basic network settings to their factory defaults. You can perform this operation from thebase unit or one of the handsets.The following settings will be reset to their factory defaults:• DHCP setting (restored to "DHCP on")• Settings related to static IP addressing (the values for static IP address, subnet mask, default gateway,DNS1, and DNS2 are cleared)• DNS settings for DHCP connection (cleared)38 Administrator Guide Document Version 2013-022.1.4 IP Reset
