Menu Item Section Title SettingAccessLevel*1Ref.U AProvisioningMaintenanceProvisioningMaintenanceEnable Provisioning*2 ü Page 126Standard File URL*2 ü Page 127Product File URL*2 ü Page 127Master File URL*2 ü Page 127Cyclic Auto Resync*2 ü Page 128Resync Interval*2 ü Page 128Header Value for ResyncEvent*2ü Page 128Reset to Defaults – – ü Page 130Restart – – ü Page 130*1 The access levels are abbreviated as follows:U: User; A: AdministratorA check mark indicates that the setting is available for that access level.*2 This setting can also be configured through configuration file programming.3.2 Programming Instructions3.2.1 Before Accessing the Web User InterfaceRecommended EnvironmentThis unit supports the following specifications:HTTP Version HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)Authentication Method Digest (or Basic)The Web user interface will operate correctly in the following environments:Operating System Microsoft® Windows® XP or Windows Vista® operating systemWeb Browser Internet Explorer® 6.0 (Windows XP only), Internet Explorer 7.0, orInternet Explorer 8.0 internet browserLanguage (recommended) EnglishOpening/Closing the Web PortTo access the Web user interface, you must open the unit’s Web port beforehand. For details, refer to theUser Guide on the Panasonic Web site (® see Introduction).52 Administrator Guide Document Version 2013-023.2.1 Before Accessing the Web User Interface
