3.4.5.3 External RTP PortChannel 1–3Description Specifies the external RTP port number used for voice communicationfor each channel.Value Range 0, 1024–49150 (0: Disable, even number only)Note• Each channel must be set to a unique port number, and all portnumbers must be an even number.• You cannot specify here the same port number as any of theport numbers specified for the individual lines in [SourcePort] in 3.6.2.5 SIP Source Port. In addition, you cannotspecify a port number that is 1 less than a port number specifiedin [Source Port] if the source port number is an odd number.• All 3 channels must be set to either enable or disable at thesame time.Default Value 03.5 SystemThis section provides detailed descriptions about all the settings classified under the [System] tab.3.5.1 Web LanguageThis screen allows you to select the language used for the Web user interface. The language setting is onlyapplicable when you log in to the Web user interface as User.Note• If you change the language while logged in to the Web user interface with the User account, thelanguage will be changed after the message "Complete" is displayed. If you are logged in with theAdministrator account, the language will be changed when a user logs in to the Web user interface asUser.• The language used for the Web user interface for the Administrator account is always English.• The language used for the handsets (or the base unit [KX-TGP55x only]) remains unchanged even ifthe language for the Web user interface is changed.Document Version 2013-02 Administrator Guide 773.5.1 Web Language
