2. [ ]/[ ]: Select the desired terminal number ("Auto", "Terminal 1"–"Terminal 9") ®3. Base unit: [ ]Handset: [ ]2.1.6 Reset Web ID/PasswordReset Web ID/Password resets all the IDs and passwords required for users and administrators to access theWeb user interface (® see Access Levels (IDs and Passwords) in 3.2.1 Before Accessing the Web UserInterface) to their factory defaults. You can perform this operation from the base unit or one of the handsets.To perform Reset Web ID/PasswordIn cases when buttons/soft key icons are shown in English alphabet1. Base unit: [MENU] (middle soft key) ® [#][7][3][9]Handset: [MENU] (center of joystick) ® [#][7][3][9]2. [ ]/[ ]: Select "Yes" ® [SELECT]All the IDs and passwords are reset, and the base unit will restart.In cases when buttons/soft key icons are shown in symbols/pictures1. Base unit: (middle soft key) ® [#][7][3][9]Handset: (center of joystick) ® [#][7][3][9]2. [ ]/[ ]: Select "Yes" ®All the IDs and passwords are reset, and the base unit will restart.Notice• Once you press [#][7][3][9], Reset Web ID/Password is performed immediately and without asking forconfirmation, regardless of the communication status. As a result, the base unit is disconnected fromthe IP network immediately. For security reasons, it is recommended that the passwords are set againimmediately (® see 3.5.2 Administrator Password or 3.5.3 Change User Password).2.1.7 HTTP Authentication SettingsTo set Authentication IDIn cases when buttons/soft key icons are shown in English alphabet1. Handset: [MENU] (center of joystick)2. [ ]/[ ]: Select "IP Service" ® [SELECT]3. [ ]/[ ]: Select "Call Features" ® [SELECT]4. [ ]/[ ]: Select "Settings" ® [SELECT]5. [ ]/[ ]: Select "Authentication" ® [SELECT]6. [ ]/[ ]: Select "ID" ® [SELECT]7. Enter the Authentication ID (16 characters max.).8. [SAVE]In cases when buttons/soft key icons are shown in symbols/pictures1. Handset: (center of joystick)2. [ ]/[ ]: Select "IP Service" ®3. [ ]/[ ]: Select "Call Features" ®4. [ ]/[ ]: Select "Settings" ®40 Administrator Guide Document Version 2013-022.1.7 HTTP Authentication Settings
