4.3 KX-TDA Series Feature Programming for DPT IntegrationInstallation Manual 111Note• The screen shot above is an example of the KX-TDA200.2. Select "Extension Number / Name" for which you want to program.3. Assign the desired Key Type to the Key Location you wish to program. When "Two-way Record","Two-way Transfer" or "Voice Mail Transfer" is selected, enter the VM Port floating extensionnumber in "Ext No. or Floating Ext No.". When "Two-way Transfer" is selected, you can enter theextension number of a desired destination under "Extension Number of Mailbox". If no extensionnumber is assigned, you will have to enter an extension number each time you use the Two-wayTransfer feature.4. Repeat these steps for each extension.5. Click "Apply" to save the changed data.4.3.13 Live Call Screening ActivationTo activate Live Call Screening, follow the steps below. PC programming is also available (see 4.3.7Live Call Screening Button Assignment and 4.3.12 Button Assignment via PC Programming).1. Press the assigned LCS Button.2. Enter the assigned LCS Password.3. Confirm that the assigned LCS Button is red-on.4. Repeat these steps for each telephone.Conditions: To activate Live Call Screening, it is necessary tolight the LCS button after assigning the LCSpassword and LCS button.
