4.9 KX-TA, KX-TD, and KX-TE Series PBX Feature Programming for APT/DPT IntegrationInstallation Manual 1374.9.5 Live Call Screening Private/Hands-Free Mode AssignmentThis program assigns a VPS response for when a message is being left in a mailbox. It determineswhether an alert tone is sent or whether the recorded message is played through the built-in speakerof the extension. The default mode is hands-free. (This item should be programmed by eachextension user through Personal Programming.)PC programming is also available for KX-TD500 and KX-TE users (see 4.9.6 Live Call ScreeningAssignment via PC Programming).1. Enter Personal Programming:a. While on-hook, press the PROGRAM button or set the MEMORY switch to "PROGRAM".b. Enter [99]. (This step is not needed for KX-TE and KX-TA.) The display changes to PT-PGMMode.2. Enter the code that corresponds to the mode you want this telephone to have.For Hands-free mode:KX-TD500: [71]KX-TD1232/KX-TD816 G, SL, NE, FR, E, AL: [ 11]KX-TD1232/KX-TD816 CE, JT, SA, NL, SP, NZ, RU, PD: [ 11]KX-TD1232/KX-TD816 C, BX, HK, X, X-BR, DBX, ML, BXDD: [71]KX-TDN1232, KX-TD88 CN: [71]KX-TD612: [ 11]KX-TE and KX-TA: [#11]For Private mode:KX-TD500: [72]KX-TD1232/KX-TD816 G, SL, NE, FR, E, AL: [ 12]KX-TD1232/KX-TD816 CE, JT, SA, NL, SP, NZ, RU, PD: [ 12]KX-TD1232/KX-TD816 C, BX, HK, X, X-BR, DBX, ML, BXDD: [72]KX-TDN1232, KX-TD88 CN: [72]KX-TD612: [ 12]KX-TE and KX-TA: [#12]Screen output: Hands-Free or Private3. Press the STORE button.4. To exit the Personal Programming mode, press the PROGRAM button or set the MEMORYswitch to "SET".5. Repeat these steps for each telephone.A single line telephone that is connected to the same extension as a proprietary telephone can alsobe used to monitor an incoming message (not available for KX-TE and KX-TA). Be sure that Live CallScreening on the connected proprietary telephone has been activated. This feature is useful whenyou are using a cordless telephone. A tone sounds to alert the subscriber that a message is beingrecorded. To intercept the call, flash the hook.4.9.6 Live Call Screening Assignment via PC ProgrammingKX-TD500 and KX-TE users can program Live Call Screening features via PC programming. Followthe procedure below to assign each feature.KX-TD500
