Do Not DisturbDescription Selects whether to enable the Do Not Disturb feature for incoming calls.Note• If Do Not Disturb has been enabled on the server, the serverrejects incoming calls and the unit does not receive any calls,even if you have selected [No] for this setting.• If you change this setting when [Synchronize Do Not Disturband Call Forward] is set to [Yes], the change to this setting isnot immediately applied on this screen. In this case, reload thescreen to confirm that the change is applied.Value Range • Yes• NoDefault Value No4.6.2.4 Call ForwardUnconditional (Enable Call Forward)Description Selects whether to forward all incoming calls to a specified destination.Note• If Do Not Disturb has been enabled on the server, the serverrejects incoming calls and the unit does not receive any calls,even if you have selected [Yes] for this setting.• If you have selected [Yes] for this setting and Call Forward hasbeen enabled on the server, but the forwarding destinationsdiffer, incoming calls are forwarded to the destination set on theserver.• If Call Forward has been enabled on the server, incoming callsare forwarded to the destination set on the server, even if youhave selected [No] for this setting.• You can synchronize the Do Not Disturb and Call Forwardsettings from the Web user interface (® see [Synchronize DoNot Disturb and Call Forward] in 4.6.2.1 Call Control) orthrough configuration file programming (® see"FWD_DND_SYNCHRO_ENABLE_n" in 5.7.1 Call ControlSettings).• If you change this setting when [Synchronize Do Not Disturband Call Forward] is set to [Yes], the change to this setting isnot immediately applied on this screen. In this case, reload thescreen to confirm that the change is applied.Value Range • Yes• NoDefault Value NoDocument Version 2013-03 Administrator Guide 1314.6.2 Call Control [Line 1]–[Line x]
