Access Levels (IDs and Passwords)2 accounts with different access privileges are provided for accessing the Web user interface: User andAdministrator. Each account has its own ID and password, which are required to log in to the Web userinterface.Account Target User ID(default)Password(default) Password RestrictionsUser End users user -blank-(NULL)• When logged in as User, you canchange the password for theUser account (® see4.4.3 Change User Password).• The password can consist of 6 to16 ASCII characters(case-sensitive) (® seeEntering Characters in1.1.6.4 Accessing the WebUser Interface).Administrator Networkadministrators,etc.admin adminpass • When logged in as Administrator,you can change the password forboth the User and Administratoraccounts (® see4.4.2 AdministratorPassword).• The password can consist of 6 to16 ASCII characters(case-sensitive) (® seeEntering Characters in1.1.6.4 Accessing the WebUser Interface).Notice• Only one account can be logged in to the Web user interface at a time. If you try to access the Webuser interface while someone is logged in, you will be denied access.• You cannot log in to the Web user interface even under the same account as someone who is alreadylogged in.• The user password is required to change the settings.• The IDs can be changed through configuration file programming (® see "ADMIN_ID" and"USER_ID" in 5.3.1 Login Account Settings).• You can reset the account IDs and passwords to their factory default settings by performing Reset WebID/Password from the unit. For details, see 3.1.4 Reset Web ID/Password.1.1.6.4 Accessing the Web User InterfaceThe unit can be configured from the Web user interface.To access the Web user interface1. Open your Web browser, and then enter "http://" followed by the unit’s IP address into the address field ofyour browser.Note• To determine the unit’s IP address, perform the following operations on the unit:Document Version 2013-03 Administrator Guide 231.1.6 Web User Interface Programming
