1. PressSetting orSetup .2. Press [#][1][3][6].3. Press [ ] or [ ] to select "Factory Setting", and then press [ENTER].4. Press [ ] or [ ] to select "Yes", and then press [ENTER].5. Press [ ] or [ ] to select "Yes", and then press [ENTER].Notice• After performing Factory Setting, the unit will restart automatically. To avoid problems, it isrecommended that you save your settings before performing Factory Setting.1.2.1.2 Resetting the Network Settings (IP Reset)Performing IP Reset from the phone user interface restores the basic network settings made through phoneuser interface programming, Web user interface programming, or configuration file programming to their factorydefaults. If the unit is unable to connect to the network after changing network settings, you can restore thenetwork settings to their factory defaults by performing IP Reset, and then try configuring the settings again.Apart from Call Rejection Phone Numbers, all Web user interface and configuration file programming settingswill be reset to their factory defaults. However, settings such as the phonebook data, are not cleared by thisfeature.To perform this initialization, follow the procedure below:1. PressSetting orSetup .2. Press [#][1][3][6].3. Press [ ] or [ ] to select "IP Reset", and then press [ENTER].4. Press [ ] or [ ] to select "Yes", and then press [ENTER].5. Press [ ] or [ ] to select "Yes", and then press [ENTER].Notice• After performing IP Reset, the unit will restart automatically. To avoid problems, it is recommended thatyou save your settings before performing IP Reset.1.2.1.3 Resetting the Settings Made through the Web User Interface(Reset Web Settings)Performing Reset Web Settings from the Web user interface (® see 4.7.5 Reset to Defaults) resets thesettings made through the Web user interface to their default values.When you use this feature, the unit will return to the status just after performing the most recent provisioningor pre-provisioning.Notice• After performing Reset Web Settings, the unit will restart automatically. To avoid problems, it isrecommended that you save your settings before performing Reset Web Settings.Note• The settings configured through the phone user interface only will not be reset. However, settings thatcan be configured through both the phone user interface and Web user interface will be reset.30 Administrator Guide Document Version 2013-031.2.1 Reset
